 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Fast recovery diodes RF601B2D Applications General rectification Dimensions (Unit : mm) Land size figure (Unit : mm) 6.0 3)Very fast recovery 4)Low switching loss Construction Silicon epitaxial planer CPD Structure 2.3 2.3 Structure (2) (1) (3) Taping dimensions (Unit : mm) Absolute maximum ratings (Ta=25C) Parameter Limits Symbol Reverse voltage (repetitive peak) 200 VRM Reverse voltage (DC) 200 VR Average rectified forward current (*1) 6 Io Forward current surge peak (60Hz/1cyc) 40 IFSM Junction temperature 150 Tj Storage temperature -55 to +150 Tstg (*1) Business frequencies, Rating of R-load, Tc=128C, 1/2 Io per diode Electrical characteristic (Ta=25C) Parameter Symbol VF Forward voltage IR Reverse current Reverse recovery time Thermal impedance Unit V V A A C C Min. - Typ. 0.87 0.01 14 - Max. 0.93 10 25 6 Unit V A ns C/W Conditions IF=3A VR=200V IF=0.5A,IR=1A,Irr=0.25*I R JUNCTION TO CASE trr jc www.rohm.com (c)2009 ROHM Co., Ltd. All rights reserved. 1/3 2009.11 - Rev.F 3.0 2.0 Features 1)Power mold type.(CPD) 2)Ultra Low VF 1.6 1.6 6.0 RB601B2D Electrical characteristic curves Data Sheet 10 10000 Ta=150C 100 Ta=150C Ta=125C CAPACITANCE BETWEEN TERMINALS:Ct(pF) f=1MHz FORWARD CURRENT : I F(A) 1 Ta=125C Ta=75C REVERSE CURRENT:IR(nA) 1000 Ta=75C 100 0.1 Ta=25C Ta=-25C 10 z 10 Ta=25 C 0.01 1 Ta=-25C 0.001 0 100 200 300 400 500 600 700 800 900 1000 0.1 0 50 100 150 200 REVERSE VOLTAGE : V R(V) VR-IR CHARACTERISTICS 1 0 10 20 30 REVERSE VOLTAGE:V R(V) VR-Ct CHARACTERISTICS FORWARD VOLTAGE : V F(mV) VF-IF CHARACTERISTICS 890 FORWARD VOLTAGE:V F(mV) Ta=25C IF=3A n=30pcs 100 90 REVERSE CURRENT:IR(nA) 80 70 60 50 40 30 20 10 AVE:4.60nA CAPACITANCE BETWEEN TERMINALS:Ct(pF) 880 Ta=25C VR=200V n=30pcs 150 140 130 120 110 100 90 80 70 60 50 AVE:99.4pF Ta=25C f=1MHz VR=0V n=10pcs 870 860 AVE:859.4mV 850 840 VF DISPERSION MAP 0 IR DISPERSION MAP Ct DISPERSION MAP 300 250 200 150 100 50 0 AVE:126.0A 30 RESERVE RECOVERY TIME:trr(ns) 1cyc PEAK SURGE FORWARD CURRENT:I FSM(A) 1000 Ta=25C IF=0.5A IR=1A Irr=0.25*IR n=10pcs Ifsm PEAK SURGE FORWARD CURRENT:I FSM(A) Ifsm 8.3m 25 20 15 10 5 0 AVE:13.7ns 100 8.3m 8.3m 1cyc 10 1 1 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 IFSM DISPERSION MAP trr DISPERSION MAP www.rohm.com (c)2009 ROHM Co., Ltd. All rights reserved. 2/3 2009.11 - Rev.F RB601B2D Data Sheet 1000 TRANSIENT THAERMAL IMPEDANCE:Rth (/W) Ifsm t 100 10 Mounted on a epoxy board Rth(j-a) 8 PEAK SURGE FORWARD CURRENT:I FSM(A) DC D=1/2 FORWARD POWER DISSIPATION:Pf(W) 10 Rth(j-c) IM=100mA IF=3A 6 Sin( =180) 100 4 1 1ms 2 tim 0 10 1 10 TIME:t(ms) IFSM-t CHARACTERISTICS 100 0.1 0.001 0.01 0.1 300us 1 10 100 TIME:t(s) Rth-t CHARACTERISTICS 1000 0 2 4 6 8 AVERAGE RECTIFIED FORWARD CURRENTIo(A) Io-Pf CHARACTERISTICS 10 15 0A AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 0V t Io AVERAGE RECTIFIED FORWARD CURRENT:Io(A) VR VR T DC D=t/T VR=100V VR=100V Tj=150C 15 0A 0V t 10 DC D=1/2 T Io VR D=t/T VR=100V Tj=150C ELECTROSTATIC DISCHARGE TEST ESD(KV) 30 No break at 30kV 25 20 15 10 5 0 No break at 30kV 10 D=1/2 5 Sin(=180) 5 Sin(=180) 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE:Ta(C) DERATING CURVE"(Io-Ta) 0 0 25 50 75 100 125 150 C=200pF R=0 C=100pF R=1.5k CASE TEMPARATURE:Tc(C) DERATING CURVE"(Io-Tc) ESD DISPERSION MAP www.rohm.com (c)2009 ROHM Co., Ltd. All rights reserved. 2/3 2009.11 - Rev.F Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. R0039A |
Price & Availability of RF601B2D09
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |